New Whitepaper Posted on my Website, August 18, 2011

Hey - we all want to know more about which battery is best, and so I have dug up details that I could and added another Whitepaper on my website - www.myelectricfly.com.

In it I compare 3 Cyclon AGM Metal Can cells, with 2 Headway LiFePO4 Cells. I think you will find some interesting discoveries, and come to the conclusion similar to that which I showed in my first Whitepaper on site, that Lead Acid Batteries are - in fact - more expensive than LiFePO4 - if you compare correctly!

The full URL to the page where the Whitepapers are listed is http://www.myelectricfly.com/whitepapers.php and they are called - 'Lead-Acid Battery Report' showing the published dates, and - in the case of the second one, the issue!

Hope the info is helpfull, and by the way - the rear windo job was completed, and the Insurance company did cover the bill! Also - we have new ways to approach the Insurance companies when asking for coverage on our EV Conversions in Ontario! Stay Tuned right here!

Electricfly Gets OK'd to fix!

This Past Thursday, my Insurange Adjuster for Western Assurance came to view the damage on my car (Finally) in front of the Body Shop! We are a Go! My attempt at saving time on thursday - by fetching a new hatchback from Discount Auto in Kitchener failed! The Part Looked the same, same style, car, etc., but did not match the specs of the hatch on the car!

The Metal frame above the glass - at center top, on my current one was 5.5" and on the one I picked up it was 4"!! The bolts mounting it fit, but it would not close!! So we had to go with fixing the current damaged hatch frame (Read - too much Bondo!) and adding a New Glass (Needed a new glass there anyway, and this is new, with the heater, and I saw on Monday - that it fits, but there is not window gasket or rubber wrap for the rear available, so we are going to go with painting it and working out a substitued sollution!

It is going to be painted White, and I will paint the roof white soon too, but need to clean up some now visible rust spots showing on the primer on the roof, first!

Electricfly Sheds Pounds, Suddenly!

On March 16, 2011, at about 2:30 P.M. - electricfly lost about 10 lbs all of a sudden when a Cube Van squeezed by where it was parked, pushing it forward 4-6" (Even though the brakes were on!), crushing the lower right corner of the Hatchback frame, and blowing out the back glass! With the Backwindow gone - it was about 10 lbs lighter!

That is based on the glass that I swept up at the time, compared to what I picked up today from what remained that I removed, and while I don't have the hard figures it would appear - based on the weight of theglass that remained, compared to the volume that blew out - that it should have been about 10 lbs!

We Still did the "electricfly Aero Mods" Event, and as the weather was a bit wet we mostly discussed possible mods to the car inside, until the end of the Event,when it began to dry out outside.

Today, I did some clean up on the Glass as I had finally some time to do so since confirming with the Insurance company that I am not at fault, and that they will cover the repair. In the process - I discovered that one of the two positive posts - the 'Traction' wiring - had actaully melted a significant portion of that post head, and it had 'drooled molten lead' down the side of the case, and onto the polypropylene ropes for the battery handle! (Good thing I was digging deep to vacuum out the shatered glass, or I might not have even noticed this one!)

I Alread had one copy of the new Power Battery High Rate AGM's that I was looking to switch the pack for while waiting on money for my Lithium cells, so I dissconected all th wires to the Battery #7, and swapped it out for the new AGM Power Battery! (Well - new to me and to Electricfly - actually a used UPS battery from an Industrial UPS set at work.)

Still need some washers to suit - since the bolt is an 8mm bolt instead of a 1/4" or 5/16" bolts as on the Trojan SCS150's installed before. Also - this means new nuts required as the exisiting wing nuts won't work, and the wiring lug end has a bit larger hole - more suited to 5/16" - hence the need for washers!

I will update with pictures later this week!

My first Event! "Electricfly Aero Mods" is coming

My first Event, learning about improving the aerodynamics of your and my vehicle - "Electricfly Aero Mods" is now being promoted, and runs on Sunday, April 10, 2011 from 1:00 PM - 4:00 PM (ET).

Speakers wanted! If you have something to share on the subject topics, I am looking for Aeromod Instructors, Assistants, and Exibitors! If you just want to see and learn - Sign up as an
Aeromods Observer!.

Limited ticketing! This is a small group gathering, so please don't hesitate if you're thinking about joining us!

Need a 3D Solids Modeling CAD Program to design your Aeromods? Check out Alibre Design!

Event Registration Online for
Electricfly Aero Mods

NAIAS - Detroit Auto Show - Today!

Today is the first Public day for the Detroit Auto Show, also known as the North America International Auto Show!

I am in Windsor, Ontario - just about to get a bit to eat, check out, and then head accross the tunnel and go check out the show!!

Did not drive the Electricfly to the show, might not do that ever, but at least not before getting a good lithium pack installed (uploaded?) in it!

(Edited Sept.02, 2011, due to discovered typo!)